Replacing a Toyota Key
There are many options to consider in the event that your Toyota key fob is damaged. A service center can cut a brand new key for you, which can save you money when the internal electronics are working fine.
If the case is damaged, it will require replacement. If the case is intact, you can open it using the key that is hidden or a tiny pry tool in the notch. Open the case and gently lift the circuit board until you can see the battery.
Keys damaged or lost
When you lose your Toyota key, or if the key fob malfunctions, it can be very stressful. toyota keys can assist you with a replacement metal key, or a high-tech key fob.
Toyota provides some of the most technologically advanced car keys on the market. Transponder chips communicate with the vehicle and stop the vehicle from starting without authorization. They also lock the engine in case the wrong key is used. They also allow you to lock and unlock the vehicle remotely and also start it. However, this extra security comes with a cost and the cost of replacing a lost or damaged Toyota key can run into hundreds of dollars.
You can determine if your Toyota key is equipped with a transponder chip by examining the blade of the key. If there is a small dot or dimple on one side, or if the key is marked with an 'H' or 'G' marking, it is equipped with a transponder. The key won't be marked or have a huge bump on its top if it's not marked.
The cost of replacing an old metal key is usually less than $50. Key fobs with the transponder chip may be more expensive, as they must be programmed to connect to the immobilizer system of your vehicle. The machines to do this are usually found at dealerships and can cost between $150 and $250 to use. The key also needs to be laser-programmed and cut.
If you require the replacement of a key fob We can order a new one for you and have it ready for you to pick up at our Hilton Head location. The cost will vary based on the type of keyfob that you require and the discounts on parts are available. If your key fob case has been damaged, but the electronics inside are still working and functioning, we can purchase an additional case to store them. If your fob is completely damaged or destroyed beyond repair, a new key will be needed.
Smart Keys Keys
If you have a Toyota that's equipped with smart keys you might be able to open the doors and start the engine without ever taking your keys out of your pocket or purse. Smart keys allow you to save settings for different drivers and also unlock windows and sunroofs via remote. You could be able to set speed limits for your child using the smart key.
To use your smart key, you need to be within 10 feet of the vehicle. If you're in the right proximity the vehicle will turn on the courtesy lights, and will open the driver's or passenger's door. Then, press the button on your key fob to open the trunk, too. A lot of modern smart keys come with a telescoping key blade that can accommodate different hand sizes and provide greater flexibility when it comes to reaching the lock and ignition buttons.
Similar to traditional car keys, the smart key fob is equipped with a transponder chip that transmits an encrypted signal when you use the lock or unlock buttons. It is designed to prevent thieves from using hot wires or taking your car away by turning off the engine immobilizer. This technology isn't without its limitations. A skilled criminal can use a scanner device to locate the code and send it to a key fob.
A newer smart key, such as the Mercedes-Benz SmartKey, utilizes an exclusive technology called rolling codes. When you put the key in the ignition, a computer inside the vehicle checks the unique code before starting the engine. This can prevent unauthorised use, as it is nearly impossible for the scanner to read the same rolling codes repeatedly.
Your smart key might be dead if it fails to respond to the lock and unlock buttons. You can replace the battery on a majority of fobs by taking the circuit board from the case. Take a photograph of the old battery and note down where the new battery will go in the case. This will allow you to in assembling it correctly. Most Toyota models utilize a CR2032 battery that is available in Freehold at any local store.
Key Fob Battery Replacement
The process of replacing the battery in your key fob isn't as hard or time-consuming as it might appear. You can get replacement batteries from any big-box retailer or hardware stores. You can also purchase them online. A new battery is not only cheap, but it can also restore the proper function of your key fob.
The first step is to take the key made of metal from the fob. A small metal button is typically located just above the key part of the fob. Press this button to release the key. Next, take apart the fob. This can be done by pressing an oblique notch that appears like a little keyhole, or by inserting a flat tool into the smallest opening on the fob. After you've cut the fob into two pieces, the front and the back, you can slide an instrument through the notch or tiny hole to access the battery compartment.
Look at the battery, which is likely silver and has the shape of an oval. The battery will have a marking that indicates the type of replacement battery you'll need. If you've got replaced the battery, take the old battery from its case and put the new one into. Be careful not to touch the flat surfaces of the battery, which are prone to fingerprints, and can alter the life of the battery.
Then, insert the key fob's case. If you're careful you don't have to force it into place. If it isn't snapping into place, try gently applying pressure on the edges to break it off from the plastic frame. After that, attach the key made of metal, turn it on, and verify that the fob is working correctly. The key fob should be just like new after the entire thing has been reassembled. However, if the key doesn't work contact us at Toyota of Irving for more assistance. We can help you get the key fob and transponder chip replaced, once you have provided the required photo identification and evidence of ownership. We can even order an additional key fob in the event that the original is damaged or lost.
Key Fob Case Replacement
While Toyota key fobs aren't as easy to lose than standard keys, you can be a bit frightened when they disappear during your Belton and Killeen commute. The case of your Toyota can be replaced easily but the internal electronics require more training and specialized knowledge. Our team at Don Ringler Toyota is here to assist you in making the right decision.
The first step is to find your Toyota key fob and then determine whether the case is damaged or not. If your key fob has been damaged or completely broken, you will require replacement by a professional dealer to get the transponder chip as well as other electronics programmed into your vehicle. This is more complex than a simple key fob replacement. You'll need provide a photo ID, proof of ownership, and the VIN of your vehicle.
If your key fob's condition is slightly damaged, you may be able to use a new case to keep using the existing electronics. This depends on how the key fob was damaged, like by water or more severe physical damage. Typically, if the hidden key piece isn't damaged, you can request a new one cut at a Toyota service center and continue using it.
With a flat tool such as a screwdriver, carefully open the case on your key fob by inserting it into the designated notch or slot. After opening the case, you can lift the circuit board to reveal the battery. Be careful not to push the case back because this could cause the electronic components to break. Carefully remove the old battery, and take note of how it sits in the case so that you can replace the battery properly.
After replacing the battery, close the case on your key fob and test it to make sure it works properly. If you are unable get your key fob to function, contact our service department and we will be happy to help. Be sure to bring your Toyota key code number which you can obtain by presenting your driver's licence and vehicle registration to our service department.